Golden Predator continues to advance Bohemian-Schooner Zone with Intercepts of 24.3 m @ 3.88 g/t Gold and 10.9 m @ 4.61 g/t Gold at Brewery Creek Project, Yukon

TSX:GPD

VANCOUVER , Nov. 4, 2011 /CNW/ - (Toronto:GPD.TO) (the "Company") is pleased to announce further results of 13 diamond drill holes from its ongoing infill program at the Bohemian-Schooner Zone from its flagship Brewery Creek Project.

Highlights of the current release include:

• BC11-287 with 10.9 m of 4.61 g/t gold from a depth of 42.1 m;
• BC11-288 with 24.3 m of 3.88 g/t gold from a depth of 14.2 m;
• BC11-292 with 14.1 m of 3.40 g/t gold from a depth of 63.5 m; and
• BC11-293 with 22.8 m of 3.78 g/t gold from a depth of 44.0 m.

A complete table of results and location map can be found on the Company's website at:
http://www.goldenpredator.com/documents/GPD-NR11-40-Brewery-Creek.pdf

Brewery Creek Project Update
To date in 2011, the Company has completed more than 240 drill holes at Brewery Creek, totalling over 38,000 m. Drilling has been concentrated on delineating the two 2011 discoveries at the Bohemian-Schooner and Sleeman Zones, with significant additional drilling on the North Slope and Classic Zones, as well as the newly identified Ice Fog Zone. Results are still pending for over 120 core and RC holes. Year-round drilling continues at Brewery Creek, with 3 core rigs and one RC rig presently operating on site. Resource modeling in support of an updated resource estimate is well underway.

Bohemian‐Schooner Zone Geology
The Bohemian‐Schooner Zone is a strongly mineralized, steeply dipping structural corridor that strikes east‐northeast. The corridor intersects a lower‐angle tabular mineralized zone in strongly altered quartz monzonite sills. The Zone sits approximately 500 m east of the Lucky deposit, the nearest past producing area, and is over 1 km in length and is open along strike to the east and at depth.

Core holes BC11-282, BC11-283 and BC11-285 failed to reach target depths having been terminated at depths of 72, 4.5 and 39 m respectively. No significant mineralization was encountered in these holes or hole BC11-284.

Sampling Methodology, Quality Control and Assurance
Samples were fire assayed for gold by ALS Chemex and ACME Laboratories in Vancouver . All assays are reported as drilled intervals and are not to be interpreted as true widths. Refer to the Company's news release dated March 24, 2011 for a complete discussion of sampling methods, quality control and assurance.

The technical content of this news release has been reviewed and approved by Michael Maslowski , BSc, CPG, the Company's Vice President, Exploration ( Canada ) and a Qualified Person as defined by National Instrument 43‐101.