43-101 resource of 8 million tons grading 16% graphite
Making the Lac Knife property the highest grade graphite resource in the world
AGORACOM NEWS FLASH
AGORACOM Welcomes North Bud Farms Inc. Focusing On Sustainable Low Cost, High Quality Cannabinoid Production and Procurement for Pharmaceutical and Consumer Infused Products
- Canadian regulatory door for CIP (Cannabinoid Infused Products) is opening in 2019
As shown in other legal jurisdictions (Colorado, Washington, Nevada, California)
- Infused products sector has become the highest margin segment of the industry
- Positioned to be a raw input producer for this space
- Currently working with multiple food, beverage and science companies to provide safe standardized cannabinoid infused raw inputs for large scale GMP manufacturing of products
Message: Focus Graphite Announces Successful 2013 Infill Drilling Program at the Lac...
Focus Graphite Announces Successful 2013 Infill Drilling Program at the Lac Knife Graphite Project
67.8 m Grading 21.10% Cgr in Hole LK-13-187
OTTAWA, ONTARIO--(Marketwired - Dec. 4, 2013) - Focus Graphite Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) ("Focus" or the "Company") is pleased to report very positive results of the summer 2013 infill drilling program on the Company's 100%-owned Lac Knife graphite Property (the "Property"), located in the Grenville Geological Province of northeastern Québec. Twenty-four (24) large diameter (PQ-sized) core holes totaling 2,081 m were drilled with the objective of upgrading the current Inferred and Indicated mineral resource to the Measured and Indicated mineral resources categories. The drilling data is currently being uploaded to the resource model in order to update the resource estimate.
Hole LK-13-187 drilled on Line 500 S targeted the western zone of the south part of the deposit and returned one of the best graphitic carbon (Cgr) intersections of the program:
Hole LK-13-187: 67.8 m grading 21.10 % Cgr (from 17.4 to 85.2 m)
All the drill holes (except LK-13-203) intercepted significant graphite intersections* along the strike length of the deposit as evidenced by the following holes from different parts of the deposit:
Hole LK-13-209 drilled on section 425 S in central part of the deposit: 7.2 m grading 27.03% Cgr (from 21.5 to 28.7 m) and 25.3 m grading 30.94 % Cgr (from 38.2 to 63.5 m)
Hole LK-13-201 drilled on section 250 S in northern part of the deposit: 34.7 m grading 19.34% Cgr (from 22.0 to 56.7 m)
* Significant intercepts are defined as Cgr >5% over a minimum of 6 m; maximum internal dilution of 6 m; maximum external dilution of 0 m.
All 36 significant intercepts are summarized in Table 1. Location map of the drill holes is available on the Company's website at www.focusgraphite.com.
Focus Graphite President and COO Don Baxter stated: "All infill drilling is now complete at Lac Knife. The results improve our current understanding of the limits and geometry of the resource and enable the interpretation of the geological model. Work on an upgrade of our mineral resource estimate to the Measured and Indicated categories is now underway. It will be used in the mineral reserve calculations and detailed mine design that form part of the Feasibility Study recently awarded to Met-Chem, Québec.
"As the infill drilling areas overlap the areas that the representative sample was taken for the recent Pilot Plant, this indicates that the flake concentrate produced within the infill area should be of the same high quality that was produced by the Pilot Plant," Mr. Baxter said. The pilot Plant demonstrated that the Lac Knife deposit yields a potentially economic distribution of large, medium and fine sized graphite flake at an average grade of 96.6% Ct (total carbon). All flake above 200 mesh is showing 98% Ct (see Focus Graphite press release dated August 21st 2013).
|Table 1: Summary of significant graphitic carbon drill core intersections (Cgr >5% and minimum intersection of 6 m) from the 2013 infill drilling program at the Lac Knife property.
|** Significant Cgr intersections are expressed as core length because the host rocks are highly metamorphosed and locally migmatized and folded. However the drill holes cross-cuts the mineralization envelope interpreted from the historical data and Focus' drill holes at a high angle.|
|*** All core sample carbon analyses performed by COREM and delivered as graphitic carbon (Cgr), internal analytical code LSA-M-B10, LECO high frequency combustion method with infrared measurement.|
The mineralization at Lac Knife is hosted in biotite-quartz-feldspar paragneiss and schist of the Nault Formation, in association with iron formations of the Wabush Formation. These are equivalent to the lower Proterozoic Labrador Trough rocks affected by the late Proterozoic Grenvillian orogeny. High grade metamorphism and folding associated with the Grenvillian orogeny has resulted in the formation of important concentrations of graphite dominated by value-enhanced large flakes.
The Lac Knife property comprises 57 map-designated claims covering 2,986.31 ha located in Esmanville Township (NTS map sheet 23B/11), 27 km south-southwest of the iron-mining town of Fermont, in the Côte-Nord administrative district of Québec. Focus acquired a 100% interest in the property in October 2010. A map showing the location of the Lac Knife property is available on the company's website at www.focusgraphite.com.
2013 Infill Drilling Program
The summer 2013 infill drilling program at Lac Knife comprised 24 large diameter (PQ-sized, 4-inch) core holes for a total of 2,081m. Sixteen (16) holes were completed in different parts of the deposit, mostly in central and northeast parts, to complete the 25m-space coverage of drilling while eight (8) holes are twin holes of historical holes. The drilling program was designed to provide sufficient additional data and control on mineralisation to be useful to complete a new resource estimate. A contract has been awarded to AGP Mining Consultants of Barrie, Ontario to complete work on a new resource estimate. That work is currently underway.
The 2013 drilling campaign was managed by IOS Services Geoscientifiques ("IOS") of Chicoutimi, Québec. The infill drilling program started on July 6st and ended on August 10th 2013. The drilling was performed by Forage Rouillier of Amos, Québec under the supervision of IOS.
Methodology and QA/QC
The entire drill cores were logged at the Lac Knife camp and shipped to the IOS facilities in Chicoutimi for sample preparation. Two slabs of about 1/4 of the 4 inch diameter PQ core were sawed parallel on each side of the central axis of the core. One of the slabs was earmarked for geochemical analysis while the other slab was kept as a witness sample. Center parts of the core are kept for possible subsequent uses. A total of 897 sub-sample slabs of the PQ drill core (mostly 1.5 m in length with variances from 0.5 m to 1.8 m) were collected from 23 holes. Slab samples were dried before processing for density measurement, crushing and grinding at the IOS sample preparation laboratory.
Once prepared, the samples were sent to the Consortium de Recherche Appliquée en Traitement et Transformation des Substances Minérales ("COREM"), an ISO/IEC 17025:2005 certified facility in Québec-City, for graphitic carbon (Cgr) analysis using LECO high frequency combustion method with infrared measurement (internal analytical code LSA-M-B10 for graphitic carbon; ISO 9686:2004). For the measurement of graphitic carbon, the sample is pre-treated with nitric acid, placed in a LECO capsule and introduced in the furnace (1,380ºC) in an oxygen atmosphere. Carbon is oxidized to CO2. After the removal of moisture, gas (CO2) is measured by an infrared detector and a computerized system calculates the concentration of graphitic carbon (% Cgr). Total sulphur was also analyzed by LECO (code LSA-M-B41) (Table 1). For sulphur determinations, the sample is placed in a LECO capsule and introduced in the furnace (1,380ºC) until sulphur is oxidized to SO2. After the removal of moisture, gas (SO2) is measured by an infrared detector and a computerized system calculates the concentration of total sulphur (% S).
Under the QA/QC program, about 10% of the samples were analyzed by COREM for total (code LSA-M-B45), organic (code LSA-M-B58), inorganic (code LSA-M-B11) and graphitic (code LSA-M-B10) carbon as well as for total sulphur (a total of 85 core samples). Duplicates of the same 85 samples were also sent to ACTLABS Laboratories of Ancaster, Ontario (ISO/IEC 17025:2005 with CAN-P-1579) for graphitic carbon (code 5D - C Graphitic) and total sulphur (code 4F - S Combustion infrared detection) determinations and for 35 multi-element analysis using ICP methods (code 1E2 - Aqua Regia). IOS introduced 85 standards, 40 duplicates (sawing, crushing or grinding duplicates) and 83 blank samples into the batch of core sample as part of the QA/QC program.
2013 Exploration Drilling Program
For the summer 2013, an initial exploration drilling program was conducted outside of the deposit limits at the same time and immediately after the infill program on the Lac Knife property. A total of sixteen (16) core holes for a total of 2,208 m were completed from August 10th to 25th. A second drilling program was conducted on October 8th to 25th that included eight (8) holes for a total of 1,013 m. Both programs were designed to test geophysical anomalies identified during last fall's ground magnetic and horizontal loop electromagnetic (HLEM) survey done by G.L. Géoservice Inc. and interpreted by Geophysique Camille St-Hilaire Inc., both located in Rouyn-Noranda. The two exploration drilling campaigns were also managed by IOS Services Geoscientifiques ("IOS") of Chicoutimi, Québec and drilled by Forage Rouillier of Amos, Québec under the supervision of IOS. Most drill holes intercepted graphitic horizons. Results of assays are pending.
In parallel to the exploration and infill drilling, the company commissioned geotechnical drilling to gather data across the proposed building sites on the property. Geotechnical and hydrogeological data will be used to increase the accuracy of mine and infrastructure design.
About Focus Graphite
Focus Graphite Inc. is an emerging mid-tier junior mining development company, a technology solutions supplier and a business innovator. Focus is the owner of the Lac Knife graphite deposit located in the Côte-Nord region of northeastern Québec. The Lac Knife project hosts a NI 43-101 compliant Indicated Mineral Resource Estimate* of 4.9 million tons grading 15.8% graphitic carbon (Cgr) as crystalline graphite with an additional Inferred Mineral Resource Estimate* of 3.0 million tons grading 15.6% Cgr of crystalline graphite. Focus' goal is to assume an industry leadership position by becoming a low-cost producer of technology-grade graphite. On October 29th, 2012 the Company released the results of a Preliminary Economic Assessment ("PEA") of the Lac Knife Project which indicated that the project has a very good potential to become a graphite producer. As a technology-oriented enterprise with a view to building long-term, sustainable shareholder value, Focus also invests in the development of graphene applications and patents through Grafoid Inc.
*Mineral resources are not mineral reserves and do not have demonstrated economic viability
The technical information presented in this news release has been reviewed by Benoit Lafrance, Ph.D., géo (Québec), Focus Vice-President of Exploration and a Qualified Person under National Instrument (NI) 43-101 guidelines.
Forward Looking Statement
This presentation contains "forward-looking information" within the meaning of Canadian securities legislation. All information contained herein that is not clearly historical in nature may constitute forward-looking information. Generally, such forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: (i) volatile stock price; (ii) the general global markets and economic conditions; (iii) the possibility of write-downs and impairments; (iv) the risk associated with exploration, development and operations of mineral deposits; (v) the risk associated with establishing title to mineral properties and assets; (vi)the risks associated with entering into joint ventures; (vii) fluctuations in commodity prices; (viii) the risks associated with uninsurable risks arising during the course of exploration, development and production; (ix) competition faced by the resulting issuer in securing experienced personnel and financing; (x) access to adequate infrastructure to support mining, processing, development and exploration activities; (xi) the risks associated with changes in the mining regulatory regime governing the resulting issuer; (xii) the risks associated with the various environmental regulations the resulting issuer is subject to; (xiii) risks related to regulatory and permitting delays; (xiv) risks related to potential conflicts of interest; (xv) the reliance on key personnel; (xvi) liquidity risks; (xvii) the risk of potential dilution through the issue of common shares; (xviii) the Company does not anticipate declaring dividends in the near term; (xix) the risk of litigation; and (xx) risk management. Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued exploration activities, no material adverse change in metal prices, exploration and development plans proceeding in accordance with plans and such plans achieving their stated expected outcomes, receipt of required regulatory approvals, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking information. Such forward-looking information has been provided for the purpose of assisting investors in understanding the Company's business, operations and exploration plans and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking information. Forward-looking information is made as of the date of this press release, and the Company does not undertake to update such forward-looking information except in accordance with applicable securities laws.
Please login to post a reply