Welcome To The Northern Iron Corp HUB On AGORACOM

Northern Iron is a mineral exploration company focused in high quality iron ore in the Red Lake mining division, district of Kenora, Ontario, Canada.

Free
Message: Results from Karas property

Northern Iron Corp ("Northern") (TSX-V: NFE) (FRANKFURT: N8I) today released assay results for drill holes KA-11-13, KA-11-14 and KA-11-15 on the Karas property. The drill holes continue testing the magnetite mineralization north and in line with the previously released holes, reaching the northern and southern ends (footwall) of the iron formation, which is still open towards the north and at depth, and extending towards the west on Hole KA-11-15. Magnetite mineralization continues to be very consistent between drill holes and shows good correlation.

“The 425 metre magnetite mineralization, which is still open at depth, is an exciting result. The property continues to exhibit great potential with excellent infrastructure in place. The drill grid of approximately 70 metres between holes could provide us with the necessary data to determine a measured, indicated and inferred resource on the Karas property by the end of 2011.” said Basil Botha, President & CEO.

To date, 20 of the planned 30 drill holes (approximately 10,000 metre program) have been completed on Northern’s 100% owned Karas property, located 15km northeast of the town of Ear Falls, Red Lake mining district, Ontario. The 10,000 metre drill program is being completed to define a mineral resource on the property by the end of 2011.

Holes KA-11-13 and 14 were drilled north of the previously released holes KA-11-01 to 06 (see press releases dated Tuesday, September 6th and Monday, September 12th, 2011), following a fence of holes oriented at 160 degrees (southeast, perpendicular to the fold axes that strike NE- SW with a northerly dip) and spaced 50m along the drill sections. Hole KA-11-14 ends in magnetite mineralization.

Hole KA-11-15 tests the western part of the magnetic anomaly 70 metres west of hole KA-11- 02, and intersects discontinuous intervals of magnetite mineralization along the entire length of the hole.

The true thickness of the Iron Formation cannot be determined yet in all currently drilled sections, but as the recently drilled holes show, the hanging wall and footwall contacts have been intersected in holes KA-11-01 to 06 and 13 to 20. Based on the geological information gathered to date on those drill holes, an estimate of 425m of true thickness is reasonable for that section of holes.

Highlights of the third set of three holes are summarized in the table below.

Hole

From

To

Interval

Fe2O3

KA-11-13

10.3

46.27

35.97

33.083

and

86.3

166.55

80.25

32.701

and

201.33

339.5

138.17

33.79

including

250

321

71

40.0031

and

361

409.45

48.45

26.819

KA-11-14

18

38.28

20.28

29.58

and

66.08

421.05

354.97

31.132

and

428

441

13

24.247

and

450.05

474.6

24.55

23.184

KA-11-15

19

22

7.35

34.8278

and

40.1

50

9.9

23.36

and

93.23

129

35.77

25.774

and

157.3

194.9

37.6

32.895

and

200

239.85

39.85

22.388

*True thickness in all holes to be determined.

Northern is pleased to announce the commencement of trading on the Frankfurt Stock Exchange under the symbol N8I.

Karas Property QA/QC

All 2011 drill holes were surveyed using a Reflex Maxibor II probe to monitor drill hole deviations in magnetic disturbed environments. Northern's personnel were trained "on-site" by Reflex personnel to operate the instrument and process the survey data. All collars are surveyed by Northern's personnel using an APS differential GPS with 3cm accuracy immediately after the holes are completed. The QA/QC protocol system employed during the 2011 exploration program included procedures for monitoring the chain-of-custody of samples and the insertion of blank samples in every batch of samples. Cross-check analyses are planned to be conducted at a second external laboratory from blind duplicate samples. Drill core samples are being prepared at SGS Canada Inc. in Red Lake, Ontario and assayed at SGS Canada Inc., in Lakeview, Ontario.

Raul Sanabria, P. Geo., is the Qualified Person for the purposes of National Instrument 43-101 for the Karas Exploration Project. Mr. Sanabria has verified and approved the contents of this news release.

ABOUT Northern Iron

Northern Iron is a mineral resource company engaged in reviving a past producing iron mine and concurrent exploration of high quality iron ore resources in the Red Lake mining division, district of Kenora, Ontario, Canada.

Northern Iron holds 100% interest in minerals claims covering approximately 14,672 hectares, comprised of the El Sol Property, the past producing Griffith Property, the Karas Property, the Papaonga Property and the Whitemud-Slate Property.

The Griffith Mine owned at the time by Stelco, produced 78.8million tonnes of iron ore for conversion to pellets and DRI from 1968-1989. Total magnetic iron recovery was 86.26%

The Red Lake area is accessible year round by Highway 105, which joins the Trans Canada highway at Vermillion Bay, 175 km south and 100 km east of Kenora. Commercial air services operate to Red Lake from Thunder Bay, Ontario and Winnipeg, Manitoba

Share
New Message
Please login to post a reply